OUR NEW RV8 HOOD,AVAILABLE AS A BOLT ON REPLACEMENT OR OUTER SKIN (FOR RACING APPLICATIONS
Viewed: 171 times.
|
metal inserts shown,laminated in place prior to assembly
Viewed: 38 times.
|
RV8 bolt on showing inner structure
Viewed: 34 times.
|
MITCH WARE OF VILLAGE AUTOBODY,ALBANY ,NEW YORK SENT THESE SHOTS OF THEIR NEWLY FINISHED B. THIS CAR IS BEAUTIFUL!!!!!!!!!
Viewed: 411 times.
|
adobe 11 (2).jpg I PHOTOSHOPED OUT ALL THE ROLL BARS FOR THE STREET GUYS
Viewed: 288 times.
|
rv8 tool 1.JPG
Viewed: 141 times.
|
WE'RE FINALLY PUTTING OUR ROAD CAR TOGETHER,HAD IT SANDBLASTED,METAL ETCH PRIMED
Viewed: 168 times.
|
SHOT BODY COLOR ON WHEREVER I COULD REACH
Viewed: 166 times.
|
frp inner wheel arch.JPG THIS IS OUR INNER WHEEL ARCH WHICH ATTACHES TO THE METAL WHEEL HOUSE AND EXTENDS OUT TO THE FENDER
Viewed: 144 times.
|
FITTING FRP WHEEL ARCH AS NECC,DRILLING LOCATOR HOLES
READYING FOR BONDING USE CLECOS OR SHEET METAL SCREWS TO TEMPORARILY LOCATE
Viewed: 167 times.
|
grinding bond areas.JPGBOND AREAS NEED TO BE ROUGHED UP
Viewed: 151 times.
|
grinding inside of fender bond area.JPG
FENDER NEEDS TO BE RELIEVED AT TOP BOND AREA SO THAT IT DOESN'T STICK UP TOO FAR PAST METAL SEAM
Viewed: 147 times.
|
APPLYING ADHESIVE TO FRP WHEEL ARCH,THIS PANEL FITS UP CLOSE TO INNER METAL HOUSE THEN BONDED AND RIVETED
Viewed: 148 times.
|
FIT OUTER FENDER PANEL GRINDING DOWN FRP WHEEL ARCH TIL EVERYTHING FITS.
Viewed: 171 times.
|
APPLY ADHESIVE TO FENDER/BODY AS NECC. LOCATE WITH SHEET METAL SCREWS OR CLECOS AND CLAMPS TIL CURED
Viewed: 185 times.
|
WE BUILT ALL NEW TOOLING,THIS IS THE FRONT FENDER MODEL PRIOR TO FABRICATING MOULD, WITH PART LINES IN PLACE
Viewed: 244 times.
|
