# CV04072,GOT HIT IN THE SIDE AND TORE UP THE ENTIRE SIDE
Viewed: 816 times.
|
ANOTHER VIEW OF THE DAMAGE
Viewed: 741 times.
|
WE HAVE FARICATED A CAP TOOL TO BOND ON AND REINFORCE THIS AREA
Viewed: 779 times.
|
TYPICAL HOOD MOUNT DAMAGE THIS IS A SIDE HIT
Viewed: 728 times.
|
P1010023.JPG
Viewed: 599 times.
|
Copy of P1010027.JPG
Viewed: 646 times.
|
ANOTHER VIEW SHOWING DAMAGE TO THE INNER STRUCTURE PANEL
Viewed: 612 times.
|
OUR REPAIR TOOLS ARE MADE TO REPLACE BADLY DAMAGED INNERS AND OUTERS
Viewed: 605 times.
|
WE HAVE SAWED OFF THE OFFENDING MATERIALS AND ARE PREPARING TO FIT THE PART IN THE MOULD/FIXTURE
Viewed: 636 times.
|
THE BONDING EDGE IS CLEANED OF PAINT AND DEBRIS TO PREPARE FOR FITMENT OF THE INNER AND SUBSEQUENT BONDING
Viewed: 619 times.
|
ANOTHER VIEW OF THE TRIMMED OFF SWARF AND PREPARED AREA
Viewed: 605 times.
|
THE REPAIRED OUTER ,OUT OF THE MOULD FOR FINAL TRIM
Viewed: 683 times.
|
NOW IT WILL BE FIT BACK INTO THE MOULD/FIXTURE FOR FINAL FIT OF THE INNER AND BONDING
Viewed: 624 times.
|
P1010022.JPG
Viewed: 598 times.
|
FINISHED EXTERIOR SURFACED AND PRIMERED
Viewed: 608 times.
|
ANOTHER VIEW OF FINISHED REPAIR
Viewed: 670 times.
|
FINISHED REPAIR INSIDE SURFACES
Viewed: 615 times.
|
THE EMPTY MOULD/FIXTURE IS OF HIGH TEMP EPOXY CONSTRUCTION TO PREVENT SHRINKAGE
Viewed: 624 times.
|
THE RIGHT SIDE OF THE MOULD/ FIXTURE PRIOR TO LAMINATING THE PART
Viewed: 647 times.
|
HERE BRANDON IS WAXING BACK PART THICKNESS TO BE ABLE TO FAB A MOULD FROM THE HINGE AREA WHICH SEEMS VERY VULNERABLE IN ALMOST ANY CRASH
Viewed: 714 times.
|
CV06467 FRONT END HIT
Viewed: 657 times.
|
FRONT HIT HAS TRANSFERED A LOT OF DAMAGE ON THE INNER STRUCTURE
Viewed: 655 times.
|
# CV06467,HIT IN THE FRONT LEFT CORNER THIS IS WHAT THE REPAIR LOOKS LIKE IN 2-K PRIMER
Viewed: 624 times.
|
WE FIXED ALL THE NICKS AND CHIPS AND ITS'S READY FOR PAINT PREP
Viewed: 656 times.
|
THIS IS THE REPAIR PANEL FOR THE INNER NOSE AREA,THE OUTER HAS BEEN REPAIRED ALREADY
Viewed: 708 times.
|
